A Molecular Copper Catalyst for Electrochemical Water Reduction with a Large Hydrogen‐Generation Rate Constant in Aqueous Solution

The copper complex [(bztpen)Cu](BF₄)₂ (bztpen=N‐benzyl‐N,N′,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine) displays high catalytic activity for electrochemical proton reduction in acidic aqueous solutions, with a calculated hydrogen‐generation rate constant (k_obs) of over 10000 s^?1. A turnover frequency (TOF) of 7000 h^?1 cm^?2 and a Faradaic efficiency of 96 % were obtained from a controlled potential electrolysis (CPE) experiment with [(bztpen)Cu]²⁺ in pH 2.5 buffer solution at ?0.90 V versus the standard hydrogen electrode (SHE) over two hours using a glassy carbon electrode. A mechanism involving two proton‐coupled reduction steps was proposed for the dihydrogen generation reaction catalyzed by [(bztpen)Cu]²⁺.     

Scanning Droplet Cell for Chemoselective Patterning through Local Electroactivation of Protected Quinone Monolayers

A reagentless strategy for template‐free patterning of uniformly inert surfaces is suggested. A layer of p‐hydroquinone (HQ) protected by the tert‐butyldimethylsilyl (TBDMS) group is electrografted onto glassy carbon electrodes. Chemoselective activation is performed through electrochemically controlled cleavage of the TBDMS group, which yields the redox‐active surface‐confined quinone moieties. The latter are shown to undergo electrochemically induced Michael addition, which serves for subsequent functionalization of the electrode surface. Patterning of the TBDMS–quinone‐modified surface is accomplished by using selective localized cleavage of the protecting group. State‐of‐the‐art direct‐mode scanning electrochemical microscopy (SECM) patterning fails to yield the anticipated interfacial reaction; however, the electrochemical scanning droplet cell (SDC) is capable of conducting the localized chemoselective reaction. In a small area, dictated by the dimensions of the droplet, electrochemically induced cleavage of the protecting group can be performed locally to give rise to arrays of active quinone spots. Upon deprotection, the redox signals, attributed to the hydroquinone/benzoquinone couple, provide the first direct evidence for chemoselective electrochemical patterning of sensitive functionalities. Subsequent SECM studies of the resulting modified areas demonstrate spatial control of the proposed patterning technique.     

Seeding Molecular Rotators on a Passivated Silicon Surface

Thermally activated rotation of single molecules adsorbed on a silicon‐based surface between 77 and 150 K has been successfully achieved. This remarkable phenomenon relies on a nanoporous supramolecular network, which acts as a template to seed periodic molecule rotors on the surface. Thermal activation of rotation has been demonstrated by STM experiments and confirmed by theoretical calculations.     

Advances in Modeling Sorption and Diffusion of Moisture in Porous Reactive Materials

Water‐vapor‐uptake experiments were performed on a silica‐filled poly(dimethylsiloxane) (PDMS) network and modeled by using two different approaches. The data was modeled by using established methods and the model parameters were used to predict moisture uptake in a sample. The predictions are reasonably good, but not outstanding; many of the shortcomings of the modeling are discussed. A high‐fidelity modeling approach is derived and used to improve the modeling of moisture uptake and diffusion. Our modeling approach captures the physics and kinetics of diffusion and adsorption/desorption, simultaneously. It predicts uptake better than the established method; more importantly, it is also able to predict outgassing. The material used for these studies is a filled‐PDMS network; physical interpretations concerning the sorption and diffusion of moisture in this network are discussed.     

Selective Extraction of Metal Ions from Aqueous Phase to Ionic Liquids: A Novel Thermodynamic Approach to Separations

The selective extraction of metals from aqueous mixtures has generally relied on the use of selective ionophores. We present an alternative strategy that exploits a recently developed approach to extraction into an ionic liquid phase, and show that a high degree of control over selectivity can be obtained by tuning the relative concentrations of extraction agents. A thermodynamic model for the approach is presented, and an experimental separation of strontium and potassium ions is performed. It is shown that tuning the concentrations of the species involved can shift the ratio of potassium to strontium in the ionic liquid phase from 4:1 to 3:4. This extraction is performed under mild conditions with relatively common reagents. The result is a proof‐of‐concept for a novel separations scheme that could have great importance in a wide range of technological applications.     

Invoking Pairwise Interactions in Water‐Promoted Diels–Alder Reactions by using Ionic Liquids as Cosolvents

Rate constants and derived activation parameters of organic reactions in aqueous media, in particular Diels–Alder reactions, are sensitive to the presence of cosolvents in water. To enhance the solubility window of water, we introduced ionic liquids as cosolvents in the aqueous Diels–Alder reaction between anthracene‐9‐carbinol and N‐ethylmaleimide. The reactive potentials of the organic compounds are parameterized by using semi‐empirical quantum chemical methods. The principle of Savage–Wood additivity of group interactions is used to quantify the pairwise group interactions among chemically inert ionic liquids and organic reactants, both at initial and transition states of the reaction. The present approach shows promise, as the use of simple calculations from easily available kinetic data can help researchers to understand the versatility of green ionic‐liquid alternatives to volatile organic solvents.     

Ab Initio H2O in Realistic Hydrophilic Confinement

A protocol for the ab initio construction of a realistic cylindrical pore in amorphous silica, serving as a geometric nanoscale confinement for liquids and solutions, is presented. Upon filling the pore with liquid water at different densities, the structure and dynamics of the liquid inside the confinement can be characterized. At high density, the pore introduces long‐range oscillations into the water density profile, which makes the water structure unlike that of the bulk across the entire pore. The tetrahedral structure of water is also affected up to the second solvation shell of the pore wall. Furthermore, the effects of the confinement on hydrogen bonding and diffusion, resulting in a weakening and distortion of the water structure at the pore walls and a slowdown in diffusion, are characterized.     

离子色谱法测定合成气制烯烃产物中的C_1~C_6有机酸

采用离子色谱建立了合成气制烯烃(SGTO)水相产物和油相产物中C1~C6有机酸的测定方法。对分离条件进行了优化,使用标准样品测定了线性范围和工作曲线,考察了方法的精密度和准确度,确定了SGTO油相产物样品的碱洗条件,并对SGTO水相产物和油相产物样品进行了测定。结果表明:C1~C6有机酸的质量浓度在各自配制的质量浓度范围内呈现良好的线性关系,相关系数均大于0.99。标准溶液的回收率测定表明回收率在95.6%~104.3%之间,5次重复测定的相对标准偏差(RSD)在0.4%~3.6%之间,表明该方法具有良好的准确性和精密度。SGTO油相产物中的加标回收率在91.1%~96.8%之间,5次重复测定的RSD为0.7%~2.3%,准确性可以满足实际分析的需要。实际SGTO水相产物和油相产物中C1~C6有机酸的分析结果表明,SGTO水相产物中C2~C4有机酸含量较高,而SGTO油相产物中C4~C6有机酸含量较高。本研究对SGTO反应研究、催化剂制备、工艺优化以及设备材料的选择具有重要意义。